User Manual for SagCAD
CONTENTS |
Prev | Index | Next |
* User setting * Company name and the name which are set here are taken in even in the data of the computer aided design, has reached the point where you know whether the data which someone made. |
Company nameIf there is a necessity, please input. |
NameIf there is a necessity, please input. |
* Path setting * |
PlanPlease appoint the place where the plan of the computer aided design is retained. |
NCPlease appoint the place where the NC is retained. |
BrowserPlease appoint the pass of the browser. |
* System construction * |
Figure recognition distanceWhen selecting the figure with the mouse, it appoints the figure you permit the gap of the point which is clicked to somewhere.It is too large, clicking the place there is no what, it selects a some figure probably will be. It is too small, the figure and the mouse the figure cannot be selected how exactly together, probably is. |
Blink time (ms)When selecting the figure, when the left button is clicked, 1 time figure goes out. This please appoint the time when it goes out with 1000 1 second. |
Scroll number of partitionsIt sets some part of length of drawing area side 1 (default 1 15) it does scroll pitch.For example, when it sets to 15, when expanding & reducing, scroll pitch to 1 / 15 of side size of the picture is set. Indicating at whatever time, if it hits 15 right arrows, the original picture goes out on on the right. |
Enlargement reduction factorFactor at time of enlargement * reduction. (Default 1.5) |
Length of picture side of 1 timeIt sets the length of side at the time of 1 times that the drawing territory. (Default 300) |
The initial value of R of filletR of fillet or initial value when the starting C of C aspect. |
Initial value of basic lengthLength of the X axial Y axis when starting is 2 times that this length.In addition when drawing the angular line " of the line in the point and the point ", the line which is drawn is this length. |
Indicatory mode of window0: In the window manager entrusts1: Command 2: State of previous end time |
Display position X of windowPosition X with respect to the window left |
Display position Y of windowPosition Y with respect to the window left |
Width of windowWidth of window |
Height of windowHeight of window |
* Size setting * |
Height of letterPlease appoint the height of letter. |
Interval of letterPlease input the length between letter and letter. |
Interval of wordBetween word and word (the space) please input length. |
Offset from dimension linePlease input the auxiliary line and the opening of letter. |
Font 1When starting please appoint the font file which is read to memory. |
Font 2While executing please appoint the font file which is read to memory.As for the font when becoming necessary for while executing, you search first from font 1 in memory. When it is not in font 1, you search from font 2, only the font data which is found reads to memory. Depending, when it appoints the font where Chinese character enters with font 1, time is required for starting. In addition, when it appoints with font 2, starting is fast, is, but now then when Japanese is used, it means to wait. |
 ? Length of arrowLength of arrow? Please appoint. |
? Angle of arrowAngle of one side of arrow? Please appoint. |
? Length of auxiliary line of opposite arrowLength of withdrawal extension in case of opposite arrow? Please appoint. |
? Auxiliary line extended lengthAuxiliary line extended length? Please appoint. |
? Offset from starting pointOffset from starting point? Please appoint. |
* System color setting * |
Background colorPlease set the color of the background. |
Selective colorPlease appoint the color in the figure which selected. |
Size colorPlease appoint the color in the dimension line. |
CAM colorPlease appoint the color of locus of the CAM. |
Color of printing rangePlease appoint the color which displays the printing range. |
Color of starting point & axisIt appoints the color of starting point and the X axial Y axis where the new plan first is drawn. |
* Color setting * The color 25 can be set to the menu of the color which is indicated with the line kind setting dialogue. Please set the color. Pushing the button, the method of setting (still it being possible, increases the setting of color, is) with, is a method of setting directly with the RGB color. |
* Line kind setting * 7 types it can set line kind. Line kind 1 --- solid line 1 Line kind 2 --- solid line 2 Line kind 3 --- dotted line Line kind 4 --- dashed line Line kind 5 --- two point chain lines Line kind 6 --- dimension line Line kind 7 --- font |
MAXAt the time in the dotted line, please appoint the length of the line where the dotted line is indicated.At the time in 1 point chain line * 2 point chain lines, please appoint the length of the long line. Furthermore, as for the smallest unit 1? Is. (The decimal point is useless) |
MINAt the time in the dotted line, please appoint the length of the line where the dotted line is not indicated.At the time in 1 point chain line * 2 point chain lines, please appoint the length of the short line. Furthermore, as for the smallest unit 1? Is. (The decimal point is useless) |
Display WidthWhen indicating in display, it appoints the line weight. |
Printer WidthWhen printing, it appoints the line weight. |
Configuration |
Prev | Index | Next |